Swapping to a 6-wire MAF PCM.

[ZX2Fast]

Check post 9 for the downloadable ZIP file.

[fireguy]

what?

[mellowness65]

I'm guessing it's a writeup he plans to do but hasn't yet. I was going to use this to do it though

[ZX2Fast]

I have a pdf file to attach but the file limit is too small. So if the limit isn't increased I'll have to print it, scan it in, then post it. I'm waiting to see if the limit is increased or not.

[fireguy]

sounds like a pita

[4U2QUIK]

http://i29.photobucket.com/albums/c276/sonichuskerdu/zfgsdvadsvasd.jpg

[4U2QUIK]

Someone Change This . Lol
http://i29.photobucket.com/albums/c276/sonichuskerdu/zfgsdvadsvasd.jpg

[ImCrazy]

just host it somewhere then link it?

[ZX2R]

I got it to zip, so it can be downloaded at least.

[4U2QUIK]

that zip would be for a different writeup. notice the maf is never even mentioned? that's because it has absolutely nothing to do with the maf. Swapping pcm's is only a big deal if you are worried about ac.

[ZX2R]

that zip would be for a different writeup. notice the maf is never even mentioned? that's because it has absolutely nothing to do with the maf. Swapping pcm's is only a big deal if you are worried about ac.
Right you are. I should pay more attention.

[catch23.5]

hey guys about the ac,i am doing the tranny swap and i have a 98 and im using the computer off of a 01, do i have to change the maf to the 6 wire ,becouse ive been reading and i think i a have to ,if i want my ac to work,and sorry for stealing this good thread , please reply ,anyone,im in the process of doing this

[Cyberman]

This document was written by me. It details how to put a PCM from a 99.5 and newer ZX2 into an older ZX2 (98, early 99). I wrote it back in the day, when I successfully put an S/R PCM in my old 99. The A/C isn't the only problem you run into, the cooling fan runs constantly without making the other changes. This shows the correct way to do the swap, without running into different issues. This document is located on my website at www.myzx2.com (http://www.myzx2.com).

Perhaps acknowledging the original author next time might be appropriate.

The document has no bearing on the MAF, it's just a coincidence that Ford changed more wiring than just the MAF.

[catch23.5]

im sorry about that man and thank you for that nice write up,i would be screwd rite naw if it wasnt for that,thanks.

[ZX2 Sleeper]

I read all of this post. If i was to put a 99.5+ engine into a 98, could i just use all the 98 things along with MAF and harness?

[TTFOWIA]

nice... very well done.

[ZX2Fast]

I read all of this post. If i was to put a 99.5+ engine into a 98, could i just use all the 98 things along with MAF and harness?

Yes, I did this with my wifes car. To make it easier on yourself, take the engine harness (everything attatched to the fuse box under the hood, including the box) off the donor car.