Speed sensor fluid

[Denny10]

Ok I see where to fill tranny and I see a green cap can you fill from that cap or do you just take off sensor?, I also see that there is some fluid around the tranny I guess o ring or gasket in the sensor is bad what should I do buy new sensor or do they make gasket or o ring and what is the best way to remove it ? I mean like just taking a extension and socket.one more thing you guys here are the best man I am learning alot bout my zx2 and saving a ton of money on labor. plus makes the wife happy heheheheh

[ZX2Fast]

Just remove that 10mm bolt that holds the bracket at the sensor. Pull the bracket out and pull the sensor up. The sensor can be a real pain trying to pull it out. If you feel like you can't remove it, there is a 23mm bolt on the front of the transmission. This is the fill hole. You'll need some flexable tubing to use that hole because it is angled slightly downward. Fill it until it starts to seep back out of that hole and it is full.

[Canuck]

Side fill hole FTW!!!!

I always use the side hole. Some people end up breaking the sensor so I'm just not gonna fizzle with it..

[Denny10]

Knowing me I might want to use side hole :o)

Thks

[mechtech]

Use the side hole, like any other car. Much easier.
Use a flex extension on your funnel.

[gunman_sr5]

Filled mine using the side hole. Like any military aircraft. When it leaks its good.