15.7 at 90mph

[zetecbeatsvtec8]

thats my time at New Englad Dragway

[ChillinZX]

90 is in 15.0 range. What was your 60ft 2.4? Unless it's ATX, then that should be a good time. 90mph in a MTX is 15 flat with good launch.

[joshalabama]

^ qft 90.58 mph at 15.2 was my last drag time, when I was in your range I was getting 87-89 but not 90.

[TTFOWIA]

90 is in 15.0 range. What was your 60ft 2.4? Unless it's ATX, then that should be a good time. 90mph in a MTX is 15 flat with good launch.

"stock" zx2 at 15 flat? in your dreams maybe...

[JoshDank]

I don't think he meant stock. he said if your trap is 90mph, that should be about 15 flat if it's an mtx.

[ChillinZX]

Yeah where did I say stock? Stock is like 84mph

[TTFOWIA]

I was talking about OP... his car is basically stock (from the sig) so I don't see how he could pull a time like this

[phosphite]

Iceman, UDP, and SCT usually give you mid 15's if you can drive it right. If he hasn't done any other mods than this (weight reduction) or his car isn't a 98 (better gearing), maybe the MPH at the track was off a bit.

[2tonejeff]

where are you from? New England dragway is the closest 1/4 mile track to where I live which is in maine.

[needfasp3ed]

post the slip

[ChillinZX]

It would make sense if your launch was bad and you took your time getting into second, then I can see 90mph at 15.7. But I dont know about 90mph with those few mods and weighted down sound system.

[pdwighty]

i've got similar mods. Not including subs or sct. and ik my car wouldn't run mid 15's or 90mph in a quarter. You ether have it dialed in perfect, are a professional racer, or are fibbing. Please post picture of slip.