yellow2000S/R
06-23-2008, 08:55 PM
This is currently JUST A FEELER.
On the old site I had many people say they may be interested pending on pics of the design. I'm just seeing how many are still interested. I have to finish other projects before I take this one on.
Description:
- The Bars are manufactured from 1.75" .095-wall DOM steel tubing and uprights are 1" .065 wall DOM. Any tabs are 1/8" mild steel and all weld areas are currently MiG welded.
Installation:
- The harness bar mounts to the stock location of the shoulder belt on the B-Pillar (eliminates stock belt) and the uprights mount to the exhaust tunnel approx 1/2" behind the center console using 2 bolts. The bars help to anchor the harness bar and prevents any vertical movement and keeps the harness bar in place at all times. Installment of these bars is also said to provide chassis stiffening in some vehicles.
NOTE: You must drill 2 holes through top of tunnel. The bolts for the brace will be tack welded in place prior to any powder coating or shipment (if raw) so plate can be dropped on and you can just go under the car to make this able to be installed by 1 person. (Doesn't hurt to have a friend to help put the main bar in but its not a big deal to do it by yourself)
Options: All prices include shipping to the 48 continental states.
As Pictured (Raw): $230 shipped
Powder coated: $275 shipped (Red, silver, or Black)
Powder coated: Send PM (Other color or 2 Stage)
(Compare prices to Sparco which run between $325-$450 + shipping)
Powder coated and installed pics coming within a week or so. Installation How-To with pictures to follow.
http://www.endlessmotorsports.net/Gallery/EndlessMotorsportsPARTS/FordZX2/HarnessBar.jpg
Disclaimer: For Off-Road/Show Use Only! Not intended for street or highway use.
On the old site I had many people say they may be interested pending on pics of the design. I'm just seeing how many are still interested. I have to finish other projects before I take this one on.
Description:
- The Bars are manufactured from 1.75" .095-wall DOM steel tubing and uprights are 1" .065 wall DOM. Any tabs are 1/8" mild steel and all weld areas are currently MiG welded.
Installation:
- The harness bar mounts to the stock location of the shoulder belt on the B-Pillar (eliminates stock belt) and the uprights mount to the exhaust tunnel approx 1/2" behind the center console using 2 bolts. The bars help to anchor the harness bar and prevents any vertical movement and keeps the harness bar in place at all times. Installment of these bars is also said to provide chassis stiffening in some vehicles.
NOTE: You must drill 2 holes through top of tunnel. The bolts for the brace will be tack welded in place prior to any powder coating or shipment (if raw) so plate can be dropped on and you can just go under the car to make this able to be installed by 1 person. (Doesn't hurt to have a friend to help put the main bar in but its not a big deal to do it by yourself)
Options: All prices include shipping to the 48 continental states.
As Pictured (Raw): $230 shipped
Powder coated: $275 shipped (Red, silver, or Black)
Powder coated: Send PM (Other color or 2 Stage)
(Compare prices to Sparco which run between $325-$450 + shipping)
Powder coated and installed pics coming within a week or so. Installation How-To with pictures to follow.
http://www.endlessmotorsports.net/Gallery/EndlessMotorsportsPARTS/FordZX2/HarnessBar.jpg
Disclaimer: For Off-Road/Show Use Only! Not intended for street or highway use.