Turbo outlet question

[Levitikuz7]

Are you able to unbolt the turbo and make it into two halves and bolt it back together so the outlet is faceing down when it is connected to the manifold?

If that doesnt make sence if i were to connect the turbo to the manifold and put in on the turbo outlet would be facing up and it needs to be facing down. So i was looking at that turbo and bolts hold the 2 halves of the turbo together and i was wondering if i unbolted the to halves and turned the half with the outlet the was it needed to go is that doable?

Thanks alot

[ZX2Fast]

It is called 'clocking' yes you can rotate the housings to what angle you want them.

[BernardZX2]

Just make sure you keep the center section vertical for the most part.

You don't need to remove the bolts either. Jsut loosen the bolts and tap with a hammer to clock to desired position.

[4U2QUIK]

yep, that's what I had to do to get the t3/t4 in my supra.