PDA

View Full Version : SPA manifold

vega
07-30-2008, 10:32 AM
Does the SPA manifold for the Focus Zetec fit with out ANY midifications ??

vega
vega
07-30-2008, 10:01 PM
Anyone ?? i can get my hands on this for very cheap.

http://i6.ebayimg.com/08/i/000/ff/c8/7187_1.JPG

vega
CT9A
07-31-2008, 03:17 AM
If its the one for the zetec then yes it will physically fit the engine. If it sticks out to far which it doesn't look like it does you might have to relocate the radiator, or use a civic one.
jeffescortlx
07-31-2008, 12:06 PM
I'm gonna take a whild guess and say, since it holds the turbo in the center of the mani, it's gonna be a tight fit for the down pipe to clear the P/S and A/C.
inis
07-31-2008, 06:20 PM
I'd be more worried about the slave cylinder clearance.
vega
07-31-2008, 07:27 PM
Ok, i want something easier to install, ill keep looking, thanks for the help

vega
BernardZX2
08-01-2008, 02:03 PM
You could use that. If anything you can just make an extension to place the turbo exactly where you want it. 2 flanges and a piece of pipe plus welding. You will not find anything that just bolts up for a cheap price.
vega
08-01-2008, 02:08 PM
How about a focus manifold ?? ive seen them in a few turbo zīs do they need much work ??
BernardZX2
08-04-2008, 02:58 PM
How about a focus manifold ?? ive seen them in a few turbo zīs do they need much work ??

Same answer. Need to replace the flange to bolt a turbo to it or make an adaptor with a focus flange on one side and turbo flange on the other. I did the later.

If the mani you have pictured was available when I turboed I would have used it since it is designed for the stresses of a turbo and has provisions for an external wastegate. JMO

How much can you get it for if you don't mine me asking.
vega
08-04-2008, 04:29 PM
How much can you get it for if you don't mine me asking.

A local guy had it listed on ebay, but it came with a turbo, BOV and oil lines, ALL new in the box for 800 or at what the auction ended, that it was 560. I allready told him that i pass.

vega