How/Where to correctly install 5 pt. harnesses

[random_hero]

Just curious as to everyones opinions on how to correctly Mount and install 5 pt harnesses? I have my harness bar all made up. I didn't know what would be the sturdiest or safest way. Should I use an I hook, bolt it through the floor and then just hook it on the I hook? Could I go over the harness har, then back down to the floor bolts where my seat bolts to the floor? I've seen that done. I'm unsure of how or what exactly to use to secure it, and how to mount them. Any ideas?

[zxtwou2]

only thing i can recommend is make sure your hanesses leave the back of the seat and go no further than 0 to -45*. they can be at 0* to the horizon, meaining level to the ground from the seat to the mounting point....or as much as -45* (in a downward direction.) any higher of an angle than 0* would be bad...as would anything below -45*

[random_hero]

I knew that from basic research, but thank you! I'm more looking how to mount them. what harware, ect.

[simplicity05]

could try to mount them in the back seat, in between the crack between the seat and the back rest. No existing hardware there I know, but just a thought

[OGreaTFuzzY1]

http://p-car.com/diy/harness/harness.htm

http://mr2.com/TEXT/sabelt.html

maybe something here will help you out manz

~Fuzzy