View Full Version : 2000 Black S/R lots o mods, just read
BlackBluezx2
08-12-2008, 12:45 PM
most of you know this car, was serious's old car, then went to tonymo then me, well it's broke, the berings on the crank shaft are gone so it wobbles in the block, it sounds like crap, but you, yes you, can fix it and have doing it, this car has too many mods to let it go to waste, i am leaving for the army to go to afgan in like a week, i don't even want to bother fixing it, and as for a part out that will only take place when i come back, (year?) so:
1) some one can buy it out rite then part out
2) some one can buy it fix it and have a nice fast s.r for cheep
3)every one can just do nothing (don't do this one!)
mod list
2000 ZX2 S/R
VIN: 3FAKP1137YR236360
MILAGE: 68,800
SPEED AND PERFORMANCE UPGRADES:
RIMS:
• SSW 17"
TIRES:
• Hankook Ventus HR II
EXHAUST:
• Gude Performance 4-1 Racing Header
• tru-bends 2.5''
• Borla Muffler
ENGINE MODS:
• Gude Performance Port/Polish Head
• Gude Performance Racing Intake Cam
• Gude Performance Racing Exhaust Cam
• 65mm Mustang Throttle Body
• Esslinger Adj. Intake Cam Gear
• Esslinger Valve Springs
• ZXTuner Underdrive Pulley
• Accord 3” Intake
• Ford Racing Intake Manifold
• Centerforce Clutch
• Centerforce Pressure Plate
• TWM Short Shifter
• SCT Chipped ECU
• Ford Racing Plug Wires
• Diablosport MAFia
• 24 lb Ford Racing Injectors
• Focus-Power MAF
SUSPENSION MODS:
• Eibach Pro Line Springs
• Tokico Struts
• Energy Suspension Motor Mount Inserts
• 21mm Rear Sway Bar
• Energy Suspension Urethane Bushings
• ZXTuner Upper Strut Bar
PAINT:
• Limited Edition Black (only 500 made)
BODY KITS and OTHER EXTERIOR MODS:
• Buddy Club Body Kit (front needs work, i have an extra stock on now)
• ZXTuner Carbon Fiber Invader Hood
Carbon Fiber Gas Door
• Erebuni GTR Wing
• Clear Corner Headlights
• Mesh Grill
• R1 Concepts Cross Drilled Brake Rotors
INTERIOR MODS:
• APC Racing Seats
• Ractive 4-point Harnesses
• APC Steering Wheel
• ZXTuner Steering Wheel Hub
• AutoMeter Digital Air/Fuel Gauge
• CyberDyne Digital Voltage Gauge
• RTM Shift Knob (SAYS S/R looks good!)
• ZXTuner Reverse Indiglo Speedo Gauges
• Diamond Plate Floor Mats
• Custom Mesh Grill Inserts
• A-Pillar Triple Gauge Pod
• Fiberglass Rear Deck
• Ichibahn Racing Pedals
• Painted Trim Pieces (impressive! which SeRious did)
ICE:
• Optima Red Top Battery relocated to trunk
• Pioneer AVH-P6600 All-In-One Head Unit
• Cadence 5.25” Component Set
• Cadence 6 x 9s
• Digital Audio 1200 watt RMS 12” Sub
• Cadence 500 Watt 2 channel Amp
• Cadence 300 watt 4 channel Amp
• Cadence 1 Farad Capacitor
• PS2 ready
• Hooker Audio Cables and Wire
• Custom 6.5” Fiberglass Kickpanels
SECURITY:
• Factory
Extra goodies:
S/R cluster with 17,000 miles
Stock Steering Wheel with Air Bag
BIG PROBLEM! i leave the 16th then come back the 22ed then leave the 24th for good so this week if all i have to talk, after that you can deal with my mother, the car does drive but i wouldn't go to far, as for price, talk to me and lets see what we can work out
help a bro out. lol
ZX2guy19
08-12-2008, 01:19 PM
Pm sent.
SeRiousZX2
08-12-2008, 01:46 PM
I would highly suggest that anyone that wants to purchase this car, at least ask for photos to prove that all of this stuff is in fact still on the car. The last that I saw and heard, a lot of it was removed and sold by Tony after he bought the car from me. Like the stereo stuff, the extra SR cluster, the kick panels, and cubby gauge pods. Not sure what else. I know that Tony also removed the Erebuni spoiler....
As for price, I sold it $6000 to Tony with all that stuff + about $3000 in extra parts like new ZXTuner cams and $1200 nitrous kit. Now that the crank is jacked up, I wouldn't pay more than $4000.
I built and installed everything in this car. Nothing was from someone elses doing. I know all the ins and outs of the car. How it drives, how fast it is/was, ect.
NOW, blackbluezx2: Please don't post that you won those awards for my car. Those were awarded to me for the work I had done on the car. Therefore, I am removing those from your description.
That is all.
BlackBluezx2
08-12-2008, 01:52 PM
not a prob, just want people to get a feel that the car is as awasome as it is put out to be, you did a fantastic job on it, everything tonymo kept in i did aswell, pics and video can be provided apon request, i didn't jack with the car or drive it hard, i belive it was just the motors time to go, , but like i said, every thing that i listed is still on the car, this is a dang good buy if some one have a motor lying around or wants a good project
SeRiousZX2
08-12-2008, 01:55 PM
You reinstalled the spoiler and stereo stuff??
BlackBluezx2
08-12-2008, 01:56 PM
yepyep, the system is AMAZING! and the parkbench flys high and mighty
SeRiousZX2
08-12-2008, 01:59 PM
Right on! Thats what I like to hear. Did he or you replace the under-dash piece that sits below the steering wheel?? I had a custom gauge pod attached to it for my nitrous setup.
5spdzx2
08-12-2008, 02:00 PM
http://www.pcmtl.com/public/misc/TTIWWOP.gif
BlackBluezx2
08-12-2008, 02:02 PM
he did, it was black and i think he tried sanding off the black, i was going to paint it but never found time
ZX2guy19
08-12-2008, 02:31 PM
A motor is about $400 for a new one, and $400 to install. It would be about $500 for anyone to come get the car, with gas prices for a truck and renting a tow dolly. The $6000 you sold to Tony was then brought down to $4500 after he sold all your shit.
Now, it has more miles, a blown motor, and is missing the Trubendz exhaust and a few other things.
corby_baby
08-12-2008, 02:38 PM
A motor is about $400 for a new one, and $400 to install. It would be about $500 for anyone to come get the car, with gas prices for a truck and renting a tow dolly. The $6000 you sold to Tony was then brought down to $4500 after he sold all your shit.
Now, it has more miles, a blown motor, and is missing the Trubendz exhaust and a few other things.
the s/r never had a trubendz exhaust when blackblue got it. only a borla s/r muffler.
blackblue put his trubendz on the s/r. (i know cause i tried to buy it off him and he said he was putting it on this car)
SeRiousZX2
08-12-2008, 03:27 PM
The $6000 you sold to Tony was then brought down to $4500 after he sold all your shit.
Why do you have to get so personal and call my work "shit"???
From what it "sounds like" most of the stuff is still with the car. The nitrous kit isn't though.
SeRiousZX2
08-12-2008, 03:31 PM
the s/r never had a trubendz exhaust when blackblue got it. only a borla s/r muffler.
Thats actually incorrect. When I sold it to Tony it had the Gude FULL exhaust system minus the Gude muffler.
It had the Gude 4-1 Racing Header, no cat, Gude 2.5" piping, Borla muffler.
Unless Tony swapped the Gude piping out with stock. It also had an exhaust dump that was installed before the muffler for when I was going to take it to the track.
ZX2guy19
08-12-2008, 03:37 PM
Why do you have to get so personal and call my work "shit"???
From what it "sounds like" most of the stuff is still with the car. The nitrous kit isn't though.
I didn't your work shit. I called the stuff on your car shit, or stuff. Shit and stuff is the same thing. How's this: "He sold all the wonderful amazingly done things on your car"
It has the same effect.
All I'm saying is, the car was lowered from $6000 to $1500 from the stuff he sold.
You are the one getting personal in this thread.
BlackBluezx2
08-12-2008, 03:40 PM
A motor is about $400 for a new one, and $400 to install. It would be about $500 for anyone to come get the car, with gas prices for a truck and renting a tow dolly. The $6000 you sold to Tony was then brought down to $4500 after he sold all your shit.
Now, it has more miles, a blown motor, and is missing the Trubendz exhaust and a few other things.
like i said, everything on the list is on the car, nothing is missing from the list nothing is missing from the car
corby_baby
08-12-2008, 03:41 PM
like i said, everything on the list is on the car, nothing is missing from the list nothing is missing from the car
what about the cyberdyne gauges zx2guy has and what about the gauge pod thats in my room :]
BlackBluezx2
08-12-2008, 03:44 PM
the thing has 3 guages in it and a spot for one more :P
5spdzx2
08-12-2008, 03:54 PM
http://www.pcmtl.com/public/misc/TTIWWOP.gif
.
ZX2guy19
08-12-2008, 03:56 PM
What does TTIWWOP mean?
5spdzx2
08-12-2008, 03:59 PM
http://www.srt-4mation.com/images/smilies/worthless%20thread%20without%20pics.gif
this is better
ImCrazy
08-12-2008, 04:41 PM
i'll give u $800 bucks.
freaktractor
08-12-2008, 05:28 PM
ummm...i can go as high as 1200
BlackBluezx2
08-13-2008, 07:53 AM
i'll have pics today for any one relly intersted
SeRiousZX2
08-13-2008, 10:51 AM
ummm...i can go as high as 1200
lol.
He can get that with just the Gude head, cams, 4-1 header, and FRIM.
SeRiousZX2
08-13-2008, 10:55 AM
Also don't forget to add the powdercoated bright red valve cover. That thing is gorgeous!!!! Unless Tony sold that too...
Serious you should go buy it back
SeRiousZX2
08-13-2008, 11:36 AM
Serious you should go buy it back
I should, but don't want/have the time to drive up there and tow it back. I know someone that might be interested though. Besides, I wouldn't give more than $3000 with the way it sits.
zxtwou2
08-13-2008, 11:50 AM
if you like...you can have it towed down here to Peoria, IL and let it sit for a year while you are gone...if you like i can overhaul the engine for you so it's good to go when you return. just let me know.
Fordboy
08-13-2008, 11:31 PM
when i went to go pic up the rims from blackbluezx2 he showed me the car and from memory most of the stuff on his list is infact on the car, the car just needs some tlc because from what i remember its a little messy, but any car can get cleaned up. what were you looking to sell it for?
BlackBluezx2
08-14-2008, 10:08 AM
whats about fair with everything in it and such.
Fordboy
08-15-2008, 09:53 PM
i say part it out because i will be interested in the trany swap(depending on miles), the springs and struts, and other stuff
dareall
08-17-2008, 04:49 AM
has this thing been sold yet?
ZX2guy19
08-17-2008, 09:16 AM
Yes, I am going to get it Saturday :]
corby_baby
08-17-2008, 10:11 AM
to bad im going to get it friday
ZX2guy19
08-17-2008, 10:18 AM
lol ok
random_hero
08-17-2008, 10:20 AM
you all fail. picking it up tursday
SeRiousZX2
08-21-2008, 04:57 PM
Maybe the new owner will actually take care of it.....
ZX2guy19
08-21-2008, 05:08 PM
That new owner will be me in in less than 48 hours.
SeRiousZX2
08-21-2008, 05:16 PM
I have heard that the new owner is going to do a "part out" which is sad.
ZX2guy19
08-21-2008, 05:18 PM
It all depends. Personally, I don't want to. But if the car is in as bad as shape as I hear, it will be parted.
No offense man, honestly, but if you loved this car as much as you say you did, you wouldn't have sold it.
ZX2guy19
08-21-2008, 05:23 PM
Serious take it to pm if you want to discuss it with me.
SeRiousZX2
08-21-2008, 05:28 PM
Well, the only thing that was noted wrong with it is the crank and lower block. That is all easily replaceable. Rumer has it that the new owner is wanting to sell the pnp head and cams, FRIM, TB, CAI, and MAF.
True, I loved the car and it was sad to see it go. But it was time to move on. I had done everything that I wanted to accomplish with the car. I built it from the ground up with performance and looks, won numerous shows with it, and had fun doing it.
I thought that I was selling it to someone that enjoyed the car for what it was and was going to take care of it. If I would have known that it would have came down to this, then I would have kept it. But again, I thought I was selling it to someone that would love and appreciate the car as much as I did.
ZX2guy19
08-21-2008, 05:35 PM
Serious, pm sent.
Come on serious..get the car back you wont regret it
scort2498
08-21-2008, 07:38 PM
actually im in the hunt... to grab if if it isn
t a done deal since i will be moving up there and i would fix it and enjoy it for all it's worth.
ZX2guy19
08-21-2008, 10:38 PM
I already paid for it guys. Sorry.
scort2498
08-21-2008, 10:41 PM
can we trade headers then a gude for a gude? and i will pay u a difference? You will see when i drive through ohio on my way to chi-town.
ZX2guy19
08-21-2008, 10:50 PM
We'll talk bro. Like I said plenty of times guys, I am waiting to see the condition of the car to see if I am parting it out. If it is good enough, I am going to fix it. That will be my judgement though and my questioning on if it is worth it or not.
We'll all know Sunday.
SeRiousZX2
08-22-2008, 12:53 PM
Keep the Gude head and header together. They a port matched and a perfect compliment for each other.
can i have my intake manifold back? lol
ZX2guy19
09-01-2008, 10:14 AM
Nope, it's going to look great on my car though :]
Nope, it's going to look great on my car though :]
well fine then, but just remember this. Those char marks on the fuel rail are a great moment in history for my car.
Sitting at a light, with no hood. Just had a semi built engine in (maybe a couple of days) , sitting there...and wam fuel line bust and hits the exhaust. Up in flames the s/r went.
The results:
to be continued.... ..
ZX2guy19
09-01-2008, 10:40 PM
Lol. Good times it seems.
vBulletin® v3.7.0, Copyright ©2000-2008, Jelsoft Enterprises Ltd.