PDA

View Full Version : nitrous

DustyMNZX2
08-15-2008, 10:14 AM
can i tap into the fuel line with the nitrous instead of drilling?
mechtech
08-21-2008, 07:57 AM
There is a good reason there are no responses to your post.
It makes no sense and no one knows what you mean.
Beodude123
08-21-2008, 12:14 PM
The fuel rail from the 98 already has a spot you can use for a fuel line.
Thnikkaman
08-22-2008, 11:38 AM
my first time plumbing the fuel system, i sliced into the rubber line and installed a t-fitting. worked great for 2 years. since then, i've replaced my whole fuel system with braided SS lines and proper -an fittings.
croquetgod
09-07-2008, 08:06 PM
Will this work on the zx2
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=360079327828&fromMakeTrack=true&ssPageName=VIP:Watchlink:middle:us
TSmiley98
09-08-2008, 08:39 AM
i cant see why it wouldnt
Thnikkaman
09-08-2008, 09:44 AM
no, that will not work on a zx2. the focus rail is built differently than ours - the fuel press sensor has a much larger diameter. if you find one for a 2000 Mustang, it will work. i'm using a mustang fuel line adapter for my zx2 fuel pressure sensor.

here is the product i'm using: http://store.summitracing.com/partdetail.asp?autofilter=1&part=AEI-15112&N=700+115&autoview=sku
it is for placing a factory sensor adapter in an aftermarket fuel system. it works perfectly with a zx2 press sensor.

here is a part that will work:
http://store.summitracing.com/partdetail.asp?autofilter=1&part=NEX-16183&N=700+115&autoview=sku