belt size?

[ZX2_2008]

what the stock serp. belt size and udp belt size?
and if you have udp and odp what size belt? thanks

[mechtech]

Which UDP?
An Essy takes a 83.5" X6 belt.
An ODP usually doesn't require belt adjustments.

[ZX2_2008]

probably the essy i think i might can get a better if i buy the belt seprately at my autoparts store, i heard one time that if you but the essy and the odp you use the stock size belt right??

[Blue ZX2]

I dont think so. If that were the case then you would be defeating the purpose of a UDP. There is ALOT of play in the auto tensioner, I wouldnt be worried about it.

[mechtech]

ESSY can not use a stock belt - it needs a shorter one.

[ZX2_2008]

i know it does by itself, i thought i heard somewhere that if you have udp and odp
you dont use a shorter belt. just wanting to know what size i need for both setups before i buy anything..

[mechtech]

As far as I know, an alternator ODP does not require a change in any belt size.

[14me]

so what belt size for powder pulley, no odp yet where might the tension pulley be, the book i got shows a 2.0 dohc but not listed as zetec or vct?

[ademaZ]

so what belt size for powder pulley, no odp yet where might the tension pulley be, the book i got shows a 2.0 dohc but not listed as zetec or vct?

81.75 or 82" if you have a powder udp without a odp.

[neckmcd]

I just bought a 00' S/R and the prevois owner put on a ODP and gave me the UDP because he said the belt wouldnt fit. Can someone let me know what size I need if they have this set up????

[tre2000zx2]

I just bought a 00' S/R and the prevois owner put on a ODP and gave me the UDP because he said the belt wouldnt fit. Can someone let me know what size I need if they have this set up????

not gonna be able to unless you tell us what brand pulleys they are.. powders and essy can take diff sizes it depends on the size of the pulleys

[neckmcd]

They are the blue anodized AEM pulley kit.