something interesting...spa manifold and turbo

[drboogaloo]

found this online while surfin'. anyone know of this setup?

http://focus.c-f-m.com/index.asp?PageAction=VIEWPROD&ProdID=1831

[simplicity05]

Subscribed

[pure]

yah , this setup has been out for a bit. I know of it , what would you like to know?

[SSG_T37]

yah , this setup has been out for a bit. I know of it , what would you like to know?

Does this fit on a ZX2 as well?

[Unlikely Hero]

Well it will bolt up, I really can't tell by the picture what angle that manifold puts the turbo but if its a 90 * it will fit with the stock radiator. Only problem I see is that its centered which means you're going to have spacing issues with the AC compressor which would require a pretty extreme angle o2 housing or removal of your compressor.

=Jason-

[inis]

from my understanding there is issues with block clearance on certain turbo's

[ilarson007]

Well that's a pretty good price for all those goodies, isn't it?

[jeffescortlx]

Well that's a pretty good price for all those goodies, isn't it?
Depends on what manufature made the turbo.
If it's a china knock off, then no it's not a good deal.
I've seen just the SPA manifolds sell on ebay for a good price.

[pure]

SPA is a company out of Brazil , I've seen a lot of there turbos at CFM and they seem very good quality. Fernando has ran two and one put up with a lot of abuse and is still good condition. It will fit but puts the turbo real close to the block , you will have to removed the PCV baffle and put a plate there. With the zx2 I believe you will have problems with the slave and a making a good DP.

[jeffescortlx]

Brazil? That's where "master power" turbo's are made. I wonder if they come out of the same factory. I've seen them be hit and miss.