Turbo, Superchargers, Nitrous
Hey, I've been thinking a lot about forced induction again, but I really don't want to go the turbo rout again since it was such a nightmare last...
Stole from www.homemadeturbo.com EDIT: looks to be for hondas well, no matter how many times we tell the newbies to search for answers to...
This is for all the turbo noobs who doesn't have any clue what anything is. One of them would be me. :) Hope this helps. So here it is: ...
next
DIY PARTS: Manifold: -Focus header -Stock ZX2 -JGS header kits -custom built -others… Turbo: Many types out there most common...
My best friends dad bought one off ebay for 30 bucks about a year ago for his S10 pickup just to give it a little extra low end for driving around...
what do you guys think of hi torque cams in turbo application? (looking especially for JohnP's input) :P
Seriously, noob questions that have been answered like at least 5 times already will be deleted and then I will come to your house and kill your...
First thing you should do after an install, adjustment, or problem with your turbo setup...a boost leak tester. Very easy and cheap to make and can...
Skip like 1:30 in. Basically we're getting Turbo chatter. Any advice? We think their may be some boost leaking in the pipes. The HKS SSQV and it's...
This is the turbo I will be getting, ...
Ok so last turbo question for awhile, I promise! lol I know a few people run the vj11 off the probe, I’d like to know what rpm it makes its peak...
I have a quick question for you. This is mainly to the people who are using a honda racing rad. How big of a fan do you all run? Im looking...
This should be my last question before I actually get my car on the road. I have some questions about how to run my vacuum lines without tearing...
I have a few questions on running a wet kit. From what i have gathered, if i run a 40-50 shot wet kit, I will not need a retune(s/r tune currently),...
Ok so i got a small setup for nos today and its just probably like a 30 or 40 shot but plenty enough for me and what i need to do with it. The nos...
I’m going to be boosting on stock internals, aiming for about 200whp. Would I need ARP head bolts, or would new stock ones suffice.
Well I was test fitting my turbo today, and I surprisingly had plenty of room to clear the radiator in the stock location. One problem I did run into...
Im just seeing a poll for everyone to have and to look at and see what the majority uses, im currently using a teo4h and its .42 mm/48mm and i may...
I plan on about 260-280hp with my turbo build. I’m going to use Eagle H-beam rods and a .080" Cometic head gasket to lower compression a bit. I...
What length did you guys go with for the oil return line from the turbo to the oil pan?
Got a Focus Power kit about a month ago and I'm planning to install it over spring break. My only worry right now is how to get the supplied tune in...
As some of you may or may not know, Fernando from Real Street Performance has been redoing his turbo setup on his Focus. It was making 420whp on pump...
I know many use a drilled Focus mani for the IHI turbo’s off of Probes, but will it work with other turbo flanges, like a T3 for instance?
What is everyone doing with their pcv valve? Do we have to use the stocker or can I use one off another car? (the reason for this is I found a...
http://cgi.ebay.com/ebaymotors/T3-T4-TURBO-KIT-99-00-01-02-03-FOCUS-ESCORT-ZETEC-2-0L_W0QQcmdZViewItemQQhashZitem5885630471QQitemZ380194980977QQptZMot...
Just wondering I am a true noob, lol but I am working on it slowly. right now my car is dead haha, getting new battery when the mother comes home....
Hey guys. First of all, I've read a lot of articles on turbos and how they work but still a few things leave me wondering.. I was hoping you could...
NA build is out, turbo build is in, few questions; My goal is around 250-270whp, I’d like to make that at about ~6500rpm, what (used) turbo should...
anyone using one?
just a few questions about what most guys are running for there turbo manifolds ive read a few guys are using SPA and Neukin manifolds is there any...
Well I know I posted few weeks back on the new setup numbers .. since then I've done a bit more to improve those numbers. Like I said in the last...
Heres a wet kit im considering getting. Wanting some feedback though. I know I will need to pick up a few odds and ends (bottle warmer, purge,...
how much would a decint turbo build run me. looking at maybe doing this in the summer jus wondering price and parts list would be good too.
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
