Forum: Exterior, Paint, and Suspension

I got one big glass gear thing that I can rotate with a screwdriver, but it seems like it only adjusts left-right aim. Don't see anything else to...

Independent Fog Lights (Rewire) 3/24/06 (Not responsible for any damage to your ride-do at own risk) Find the white plastic piece with all the...

DIY: Clear Corner / Black out housing mod / Halos (Brought up in the ChatBox) There are 2 main ways to go with this mod. You would choose...

Raise rear of car and support on jack stands. Remove Wheels. Items you will need. 2 new hub/bearing assemblies (Autozone $50 each), a 32 mm...

Tools needed: 14mm and 12mm socket and ratchet, 12mm wrench, 14mm wrench(only if you use upgraded endlinks) Time: <1hour Parts needed: sway bar, d...

At school, (WyoTech) we finished body work with 220 grit. Then you put 3 to 4 layers of a high build primer on. Wait till cured per instructions....

Improved Handling with Anti-Roll Bars Any enthusiast worth his salt knows that tires have arguably the biggest impact on a vehicle's handling....

Well I know people have a good idea on how to do this but I'd thought I'd share some pics. You could get away with doing this and only paint the...

I DONT REMEMBER WHO WROTE THIS AND IM NOT TAKING CREDIT. I AM JUST PUTTING IT BACK ON THE SITE SINCE IT IS NOT HERE. :] Just wanted to finally let...

I’m going to assume that you can get your springs off first for this. Now we have a bare strut. The first thing to do is knock that silvery...

Had to replace this thing today due to being run off road and swirving into a 180 into a curb. 1. Jack up rear part of car lol. 2. unhook...

If you have never done bodywork before, working with fiberglass can be kind of a headache. Hopefully this how-to will get you pointed in the right...