How-tos and knowledge
Mods please move this to tutorials please, thanks Ok, so you can spend $45+ on gauge overlays depending on how fancy/cheap you buy. Or if your...
http://www.ford-forums.com/ford-escort/4569-2000-ford-escort-constant-control-relay-module-ccrm.html Cut and paste. I had to post this...
Again, found this saved on computer. You will need to download both unless u only want to finish it half way!!! lol *Am not taking credit
Custom Sail Panel Tweeter Pod How-To This is a very fast way to make a set of custom sail panel tweeter pods. These take no longer than a full...
High & low beam headlamp 9007LL 9007SU Silverstar ULTRA for Ultra Night Vision - The Whitest and Brightest Halogen 9007ST Silverstar High...
This covers how to install an electric sending unit for an oil pressure gauge. Since this how-to involves removal of the altenator to reach the...
Stand alone Harness: http://shopper.cnet.com/av-cables/metra-metrawire-car-stereo/4014-7889_9-31319056.html With Faceplate adapter: ...
8-pin connector at the amp, input from stereo: Black - LF(-) White - LR(-) Brown - RF(-) Yellow - RR(-) Green - LF(+) Red - LR(+) Pink - RF(+)...
1. Set the temp controll to all the way on Cold. Unhook the Temp Controll Cable Next to the Gas Pedal. Theres a white Tab Sticking out push on it...
This is a very basic remote start/keyless entry install. I cannot cover every possible situation in this how-to. Anyone that has a general knowledge...
has anyone removed it or tried taking it off the windows. i want to get it off the front driver/passenger windows
1. There is a philips screw on both sides of the rear section of the center console. Slide the seats forward for access. - The rear section will...
For the most part its quite simple. It comes out as one big assembly. You could probably find it by searching but i'll try to remember most of it. ...
Since I've read a few times about ppl looking for CCRM info I figured I'd post And I saw the PCM pinout but had a hard time reading it although it's...
Not done for a ZX2, but it could be. ;) http://forums.neons.org/viewtopic.php?f=51&t=200509 (Mods, feel free to move this if it would fit...
It looks hard but it is very simple: Tools: 1. Phillips screwdriver 2. Flat head screwdriver 3. Cutter 4. Long nose pliers Instructions:
click on the link. http://teamzx2.com/zx2connectors.pdf
Here you go... I was trying to figure out which PCM wires to use when I'm going to plug my Apexi AVC-R Boost controller, so I thought I would just...
Ok, many of you have wondered how to make a custom A-Pillar gauge pod. Well, here is a how-to that I put together exclusively for TeamZX2. The look...
Gauge Pod Cubby How-To First you need to gather the material that you will be using in this project. Here is the list: ·(1) Plastic Drop...
There are currently 2 users browsing this forum. (0 members & 2 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
