Forum: Exterior, Paint, and Suspension

Tools needed: 14mm and 12mm socket and ratchet, 12mm wrench, 14mm wrench(only if you use upgraded endlinks) Time: <1hour Parts needed: sway bar, d...

S/R Strut and Lowering Spring Install What you need: -Basic socket set -Spring compressor -Screwdrivers (Mostly for rear interior...

Well I know people have a good idea on how to do this but I'd thought I'd share some pics. You could get away with doing this and only paint the...

These are fully adjustable inverted coilovers. Attach is pictures and documentation from Ford Racing. Also I got info from Ford Racing: 2000:...

Raise rear of car and support on jack stands. Remove Wheels. Items you will need. 2 new hub/bearing assemblies (Autozone $50 each), a 32 mm...

At school, (WyoTech) we finished body work with 220 grit. Then you put 3 to 4 layers of a high build primer on. Wait till cured per instructions....

Improved Handling with Anti-Roll Bars Any enthusiast worth his salt knows that tires have arguably the biggest impact on a vehicle's handling....

I DONT REMEMBER WHO WROTE THIS AND IM NOT TAKING CREDIT. I AM JUST PUTTING IT BACK ON THE SITE SINCE IT IS NOT HERE. :] Just wanted to finally let...

I’m going to assume that you can get your springs off first for this. Now we have a bare strut. The first thing to do is knock that silvery...

Had to replace this thing today due to being run off road and swirving into a 180 into a curb. 1. Jack up rear part of car lol. 2. unhook...

If you have never done bodywork before, working with fiberglass can be kind of a headache. Hopefully this how-to will get you pointed in the right...