got tint off with steamer but some glue is still there yea swedevil it was dead
Heat guns are the best. Remove the residual adhesive with a 50/50 mix of Windex & rubbing alcohol (its cheap, non-toxic, smells OK, & doesn't damage anything) using a clean rag. Single edge razor blades are also handy (not for heated back windows) if you spray & scrape.
russ
Last edited by russ; 07-18-2009 at 09:08 PM. Reason: omission
got tint off with steamer but some glue is still there yea swedevil it was dead
For the adhesive use 3m adhesive remover and plastic razor blades in a blade holder. Get the majority off then use a real razor blade with rounded corners.
Last edited by KansasZcar; 07-31-2009 at 09:22 PM.
2002 ZX2 - Keman intake, OBX 4-2-1 SS Header, Custom Interior. In pieces ATM.
You don't need anything but a 50/50 windex & rubbing alcohol mix & a couple of razor blades & rags. Maybe 10 minutes per window. The adhesive remover is not really necessary & can damage the interior plastics..
best way
Step 1 is to get a steamer for clothes.
Step 2 use it to remove tint by steaming a section then pulling it off repeat until done
Step 3 Get denatured alcohol a rag some paper towels and windex
Step 4 put alcohol on rag wipe in circles until all residual glue is off then wipe clean with windex
Thats what i did and it worked great took maybe 40 minutes overall
There are currently 1 users browsing this thread. (0 members and 1 guests)