+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 16

Thread: WTB Headlight lenses

  1. #1
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default WTB Headlight lenses

    Made me another set of projectors and need a set of headlight lenses. Let me know.
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  2. #2
    Join Date
    Apr 2008
    Location
    Columbus, OH
    Posts
    11,390

    Default

    I have a set of just lenses.
    Je Pistons, Crower Rods, FC Mains, Clevite Bearings, ARP, JohnP head, SVT head gasket, 63 lb injectors, Crower titanium springs and retainers, OBX fuel rail, Aeromotive FPR, FRIM, Crown Vic TB, Wings West, Ground Controls, S/r Tokico, Tial 38mm wastegate, Garret GT30, 3" DP, P/S delete, A/C delete Tial Q BOV, XCal3, 80mm MAF, Spec Stage 4, MFactory LSD, Motegi Tracklites, 3" Trubendz


    skate42112 (11:52:54 AM): one said looking for a huge white cock and I clicked and it was some dude

  3. #3
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    Pics? What would you want for them.
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  4. #4
    Join Date
    Apr 2008
    Location
    Columbus, OH
    Posts
    11,390

    Default

    Make me an offer. They have some overspray on them but a re-polishing kit would work sex on them:



    I can ship today if you make the decision quick.
    Je Pistons, Crower Rods, FC Mains, Clevite Bearings, ARP, JohnP head, SVT head gasket, 63 lb injectors, Crower titanium springs and retainers, OBX fuel rail, Aeromotive FPR, FRIM, Crown Vic TB, Wings West, Ground Controls, S/r Tokico, Tial 38mm wastegate, Garret GT30, 3" DP, P/S delete, A/C delete Tial Q BOV, XCal3, 80mm MAF, Spec Stage 4, MFactory LSD, Motegi Tracklites, 3" Trubendz


    skate42112 (11:52:54 AM): one said looking for a huge white cock and I clicked and it was some dude

  5. #5
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    As long as there is no overspray on the inside of them. I dont know $20 shipped?
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  6. #6
    Join Date
    Apr 2008
    Location
    Columbus, OH
    Posts
    11,390

    Default

    Almost positive it is on the outside.

    I can do $30 shipped with paypal fees to mooman30@aol.com
    Je Pistons, Crower Rods, FC Mains, Clevite Bearings, ARP, JohnP head, SVT head gasket, 63 lb injectors, Crower titanium springs and retainers, OBX fuel rail, Aeromotive FPR, FRIM, Crown Vic TB, Wings West, Ground Controls, S/r Tokico, Tial 38mm wastegate, Garret GT30, 3" DP, P/S delete, A/C delete Tial Q BOV, XCal3, 80mm MAF, Spec Stage 4, MFactory LSD, Motegi Tracklites, 3" Trubendz


    skate42112 (11:52:54 AM): one said looking for a huge white cock and I clicked and it was some dude

  7. #7
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    I need you to make sure because the set that came with my lights has paint on the inside and it is one giant PITA to get off.
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  8. #8
    Join Date
    Apr 2008
    Location
    Columbus, OH
    Posts
    11,390

    Default

    I just tried to scratch on the inside and felt nothing, scratched on the outside and felt a rise (the paint).

    I'm just saying there are no guarantees there isn't like a TINY bit on the inside. The major overspray is on the outside for sure.
    Je Pistons, Crower Rods, FC Mains, Clevite Bearings, ARP, JohnP head, SVT head gasket, 63 lb injectors, Crower titanium springs and retainers, OBX fuel rail, Aeromotive FPR, FRIM, Crown Vic TB, Wings West, Ground Controls, S/r Tokico, Tial 38mm wastegate, Garret GT30, 3" DP, P/S delete, A/C delete Tial Q BOV, XCal3, 80mm MAF, Spec Stage 4, MFactory LSD, Motegi Tracklites, 3" Trubendz


    skate42112 (11:52:54 AM): one said looking for a huge white cock and I clicked and it was some dude

  9. #9
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    Alright at least they are better than these ones.

    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  10. #10
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    payment sent
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  11. #11
    Join Date
    Apr 2008
    Location
    Columbus, OH
    Posts
    11,390

    Default

    Alright I'll ship them in a little bit.
    Je Pistons, Crower Rods, FC Mains, Clevite Bearings, ARP, JohnP head, SVT head gasket, 63 lb injectors, Crower titanium springs and retainers, OBX fuel rail, Aeromotive FPR, FRIM, Crown Vic TB, Wings West, Ground Controls, S/r Tokico, Tial 38mm wastegate, Garret GT30, 3" DP, P/S delete, A/C delete Tial Q BOV, XCal3, 80mm MAF, Spec Stage 4, MFactory LSD, Motegi Tracklites, 3" Trubendz


    skate42112 (11:52:54 AM): one said looking for a huge white cock and I clicked and it was some dude

  12. #12
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    Cool thanks man.
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  13. #13
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    Quote Originally Posted by ZX2guy19 View Post
    Alright I'll ship them in a little bit.
    Thanks a bunch man I got them yesterday. They will be just perfect.
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

  14. #14
    Join Date
    Apr 2008
    Location
    Columbus, OH
    Posts
    11,390

    Default

    Awesome man, ii upgraded you to priority since you are so far awayh...didn't want you to wait forever.
    Je Pistons, Crower Rods, FC Mains, Clevite Bearings, ARP, JohnP head, SVT head gasket, 63 lb injectors, Crower titanium springs and retainers, OBX fuel rail, Aeromotive FPR, FRIM, Crown Vic TB, Wings West, Ground Controls, S/r Tokico, Tial 38mm wastegate, Garret GT30, 3" DP, P/S delete, A/C delete Tial Q BOV, XCal3, 80mm MAF, Spec Stage 4, MFactory LSD, Motegi Tracklites, 3" Trubendz


    skate42112 (11:52:54 AM): one said looking for a huge white cock and I clicked and it was some dude

  15. #15
    Join Date
    Apr 2008
    Location
    Bozeman, Montana
    Posts
    797

    Default

    You are the man! I bought alot of stuff before this and am still waiting on it
    2001, SVTF DSI, 3"CAI, Obx header, Coilovers, Powder UDP, AC/PS delete, B&M Short Shifter, Leather Seats, 21MM Swaybar, Polyurethane Bushings, Custom FORD Emblems, Clear Cornered Projector Headlights, Tinted LED tailights, LED License Plate Lights, LED Center Reflector, Paint Matched M3 Mirrors, Vent Visors, 2.25" pipe no cat Magnaflow Muffler, Ported TB, Rear Tie Bar, MX-3 Rear Disc Swap, C.O.P. System, XCAL2, OCC.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts