Results 1 to 7 of 7

Thread: dynomaster

  1. #1

    Join Date
    Jul 2009
    Location
    harlingen,tx
    Posts
    2,732
    Points
    33,914
    Bank
    0
    Total Points
    33,914
    Donate  

    Default dynomaster

    Anyone try the dynomaster application on the Droid phone?
    00, mtx, b&m shortshifter, sparco boot and knob,zxtuner header,2.5 in borla exhaust,sr drop, knock mod,K&n intake,zxtuner adj cam gears,vct delete,full ac delete,lxq2 superchipped,es motor mounts. turbo soon!-TOTALLED!!!

    Quote Originally Posted by kurtcrosbie View Post
    I figure since the noise is affected by the ac being switched on and off, it must be the ac clutch or pulley. Is that not a good assumption? How would I determine which pulley it is if all of them spin normal?

    Sent from my SCH-I800 using Tapatalk
    Quote Originally Posted by dareall View Post
    you have a lot of miles on your car. Plus your car is over 13 years old. Realistically you are probably due for the clutch replacement on your compressor.

    Sent from my laptop with me typing all my own shit

  2. #2

    Join Date
    Jul 2009
    Location
    harlingen,tx
    Posts
    2,732
    Points
    33,914
    Bank
    0
    Total Points
    33,914
    Donate  

    Default

    Anybody?

  3. #3

    Join Date
    Dec 2009
    Location
    FINY
    Posts
    74
    Points
    1,878
    Bank
    0
    Total Points
    1,878
    Donate  

    Default

    just got it, will try it out tomorrow if i can afraid of what i'll see, my Z needs a lot of improvements!
    99 red MTX,Keman Mod,Aftermarket Keyless Entry,Start Engine Button,
    Reverse Glow Gauges,UDP,Noob taillight mod
    ...:::Бороться и искать, найти и не сдаваться!:::...

  4. #4

    Join Date
    Jul 2009
    Location
    harlingen,tx
    Posts
    2,732
    Points
    33,914
    Bank
    0
    Total Points
    33,914
    Donate  

    Default

    According to it, my cars 1/4 mile time should be 14.8 but I put the settings to read at a 20 MPH roll

  5. #5

    Join Date
    Dec 2009
    Location
    FINY
    Posts
    74
    Points
    1,878
    Bank
    0
    Total Points
    1,878
    Donate  

    Default

    so, finally got around to trying the dynomaster!

    it wasn't my car, i caught a ride with one of my friends, he has a 2005 subaru outback XT (ATX), with a turbocharged 2.5 4-cylinder, manuf spec at 243 hp (181kW). he said that the guy he bought it from told him he's upgraded the exhaust, so it should give out even better performance. anyway, i leave on a tiny island for the summer, with a all-around 30 mph speed limit, and there's like only 1 single place where u can actually speed up up to like over 60, but i don't think the road is a even a quarter mile long there! so here's us, almost tripling the speed limit, just to try how this thing worx all and all, it's a stretch of the road in the middle of a field, with 100% clear view of all surroundings and anything that u can hit or smash!

    anywho, here's the pic that i got:



    disregard the zx2 name, it's just a preset value

    what do u think? is that accurate enough? my buddy said he did not floor with the gas pedal, and he did not use the +/- shifting either. can't wait to try it on my Z, but with a slipping clutchm it'll prob be a disaster to watch!

  6. #6

    Join Date
    Dec 2009
    Location
    FINY
    Posts
    74
    Points
    1,878
    Bank
    0
    Total Points
    1,878
    Donate  

    Default

    oh, just noticed, it shows the weight there, that's the weight of the Z, right? so if the subaru is heavier, and the soft calculates the hp using that weight.... than that is completely wroooonggg!!!!

  7. #7

    Join Date
    Apr 2009
    Location
    San Antonio, Texas
    Posts
    3,733
    Points
    3,441
    Bank
    111,715
    Total Points
    115,157
    Donate  

    Default

    are you gonna get it?
    K&N Typhoon, Knock Mod, Borla Pro Xs w/2.25 pipe
    SR suspension, Pnp TB, 5spd swap, Luk Clutch kit, FR Pulley
    Alpine CDE 133BT, Sony Xplodes 6x9s and 6.5s, Kicker 650.4, Kicker 12" Comp sub.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •