Just thought some of you guys might want to know that I stripped 3rd gear at a road course last weekend. I'm only making 200 whp. I have heard of 3rd gear stripping from a lot of drag runs and over 300 whp. Never thought I'd strip mine. I've mainly been doing road courses. Done about 9 road course weekends and 1 maybe 2 days of drag racing on this transmission. Its a completely stock mtx with Redline MTL.
T3/T4 turbo 40 trim, FMIC, 2.5" Piping, 70mm Mustang Maf, 1g DSM BOV, 70mm throttle body, Ford Racing Intake manifold, 42lb Green Top Injectors, SVT Fuel Pump, Focus Shorty header, Turbo Adapter Pipe, 38mm Tial Wastegate, 2.5" Full Exhaust w/ high flow cat, Fidanza Flywheel, Spec 3+
i stripped my spider gears at 189 whp and 233 wtq which isnt uncommon but the main drive gear was starting to strip as well. trans is weak and 3rd is most common stripped gear.
Je Pistons, Crower Rods, FC Mains, Clevite Bearings, ARP main studs, Custom 13mm ARP headstuds, JohnP head, Cometic HG, 80# injectors, FR springs and retainers, FRIM, Crown Vic TB, Wings West, S/r suspension, Tial 38mm wastegate, GT35 turbo, HKS SSQV, XCal3, Spec Stage 5, MFactory LSD, Motegi MR8's, 3" DIY Exhaust, DIY top mount turbo manifold
Actually stripped the teeth off?
#1
2nd and 3rd gear are weak. Actually it's the forces acting upon the 1st-2nd gear shift and the 2nd gear to 3rd shift because the mainshaft and secondary shaft spread apart (try to anyway) because of the helical gear setup. And you then try to shift fast.
Basically your putting 200whp into the edges of the helical gears, stripping off the tips of those gears. I believe thats what happened. Or you blew up your diff which I could easily see if your doing autocross.
Last edited by ChillinZX; 04-24-2012 at 06:22 PM.
2013 Toyota Tacoma V6 SR5 4X4 double cab long bed (daily driver and rescue vehicle for my racing team)
2000 ZX2 (The KLDE block/KLZE head hybrid V6)
1982 Suzuki GS1100L (when I want to be a badass)
he has mfactory so that isn't it
Mech, I assume I have. Still had all the other gears. Will be replacing the trans this weekend. Probably pull it apart next week to verify. Yesterday it stop engaging 2, 4 and reverse.
Probably what happened Chillin. Its not the diff. Car still drives fine in the other gears. I don't have a Mfactory.
If it still drives in the other gears wouldnt that be a bad shift fork?? had something similar happen to mine and is that good tranny fluid??
A bad shift fork would affect two gears not just one. Yes that's good tranny fluid. Right next to Amsoil. Hell, It'd better be for the price. LOL.
Nope. We talked about it Zach. But I never got it. I should be good. Thanks though. Renting a Fiat for the weekend to get around. Should be interesting.
If it is a synchro, yes it would grind or throw it out of gear. Then you would have to rev match. Synchro's work for two gears as well.
im just waiting for pics of the carnage
2000 ZX2 MTX "Plasti" the ONLY totaly plasti-diped zx2! NOW WITH FRONT END DAMAGE and a broken trans
going down for the winter to be repaired
03 Twilight blue ATX: Project twilight DD
GO: optimized TB, ported intake mani, S/R Borla, custom CAI, ATX resistor mod
Grip: 99 S/R wheels, 21mm RSB
Show: Blaupunkt rear Polk front speakers, 3 10s, 2 amps, silver guage suround. #2 pool ball oil cap, independent to parking lights fog mod, old ford blue 98 VC.
to do: whatever breaks next
I have heard of this before. Cyro treating your gears would be a wise investment.
The last person I know who destroyed his third gear was kickerZX2 on the dyno on a third gear pull he destroyed that gear with 300whp.
Shawn
1998 Ford Escort ZX2 ATX
Bolt-On's, Tuned, Stalled, D.O.T Slicks
16.3@82mph, 2.38 60ft
1998 Ford Escort ZX2 MTX (Sold)
Cone Filter, Muffler Delete, Spec Stage 1 Clutch
16.2@83MPH, 2.34 60ft
I've stripped 3rd clean, based on what you are saying it sounds like this is what happened. It is odd at your power level , but anything is possible with this trans.
5speed, when I get ready to build a trans I will have it cryo treated along with the polish work JohnP does. Plus the upgraded shift forks and Mfactory should make it damn near bullet proof.
Definitely odd, Pure. I automatically thought I blew the diff because it happened as I was exiting a 90* corner. Then realized it was only third that was missing. Still had all the others.
About to get it towed to the shop to swap it out tomorrow. Putting in Boss's old ZX2 trans with the 98 gears, beefed up diff and thicker axles. Gonna use the sedan 5th gear to save on gas a little.
There are currently 1 users browsing this thread. (0 members and 1 guests)