talkin' bout', bad for the kids!!
vct circuit repurposing?
could I repurpose the vct circuit to power a motor like an electric cut out?
Old Man
The VCT solenoid is duty-cycled and by a varying amount determined by the PCM with input from the cam angle sensor, so in a short answer, no. Use a widow switch, that would be much easier.
Read the Welcome thread before you ask questions, please <---CLICK
Help me win a GoPro, click below!
1998 Ford ZX2 Escort Turbo: 13.908 @ 106.280 MPH
TO4E (Ebay knock-off) at 10 psi.
13.9 at 106 mph
See a ZX2 tow 3500 pounds of car and tools!
You Tube Channel
focus intake runner control?
My car is a collectable according to PennDOT
My car has had two owners: Ford Motor Company and Me
talkin' bout', bad for the kids!!
thats another possibility that i was thinking about.
Old Man
The VCT doesn't operate at WOT.
Newb
Hello People ....
What role does the VCT solenoid play in the automatic transmission part-throttle ?
What does it control in the trans; the shifting at Various load requirements, and so on ? What trans. problems are encountered with a Defective - VCT SOLENOID ?
Thank-You, NITROJC.
Administrator
The VCT controls only the exhaust cam angle at part throttle, inducing EGR flow. It has no bearing whatsoever on the transmission.
2001 Crown Vic P71 - Wife's Daily Driver, My Scare-the-shit-out-of-people car.
2000 ZX2 - Getting parts moved over.
1998 ZX2 - Murdered by Deer. Mods below are getting moved to it's replacement bit by bit.
Mods: Megasquirt 3 EFI with COP Sequential Spark, Returnless Fuel Controller, Innovate Wideband Controller, 2-3/4" WAI, SVT Focus DSIM, Stainless Brake Lines, Ford Racing Green-Top Injectors, Filled Mounts, PS and AC Delete, 55W 5000K HIDs, Retrofitted Projectors, 21mm RSB, 2003 Focus Zetec Engine with ZX2 Intake and Focus Exhaust Cams, Tri-Y Stainless Header, 2.5" Trubendz -w- Cat, 18" Resonator, and Magnaflow Muffler. .60/.63 T3 turbo awaiting install.
"I usually downshift when I'm near a Prius so they can hear me hurting the environment"
Have you repped someone helpful today?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
