Results 1 to 7 of 7

Thread: Rotor help

  1. #1

    Join Date
    Sep 2017
    Posts
    1
    Points
    1,116
    Bank
    0
    Total Points
    1,116
    Donate  

    Default Rotor help

    I bought this car about a week ago got all the parts it needed to make it reliable again.. Or so i thought.. Well the passenger rotor came off perfectly fine, few light taps came right off no problems. Driver side complete opposite ive spent hours on this now. My rotor broke off not just like oh it didnt come off. Its seized, rusted and as far as I'm concerned someone put 10x concentrated. Extra strength gorilla glue or whatever is stronger than that. I need help I'm not sure what to do here besides grab my 10lb sledge and swing as hard as i can hoping i dont hit lug studs.

    My rotor broke off from the center I'm trying to upload pics it keeps saying I'm not logged in though

  2. #2

    Join Date
    Apr 2008
    Location
    N/A
    Posts
    4,579
    Points
    211,819
    Bank
    0
    Total Points
    211,819
    Donate  
    For those lonely nights without me. - MrWeeyums No Message - CJW 

    Default

    Sounds liked seized on. Might need a new hub of its breaking off at this point. By hit it with a hammer so many times could wreck the bearing.

    Sent from my LG-K550 using Tapatalk

  3. #3

    Join Date
    Nov 2008
    Posts
    540
    Points
    53,402
    Bank
    0
    Total Points
    53,402
    Donate  

    Default

    Lube it up with penetrating oil around the centre hole and the wheel studs. Let sit for a bit. Give it a few good whacks with hammer and repeat.

  4. #4

    Join Date
    Jun 2009
    Location
    Not Flint, but near Flint MI.
    Posts
    5,773
    Points
    91,066
    Bank
    398,013,218
    Total Points
    398,104,284
    Donate  
    here's some light beer every one is too fat down here - Diesel here's some light beer every one is too fat down here - Diesel Thanks for the Gude! - 00escortowner Thanks for the FR Wires! - 00escortowner Look it's bananas! B-A-N-A-N-A-S! - Ant98mtx 
    for helping noobs even when they don't want to listen - dareall 

    Default

    pneumatic impact hammer
    96 Chevy C2500 ~ Truck-lite L.E.D. 5x7 Headlights, Goodyear Kevlar Wrangler MT/R's
    01 ZX2 ~ S/R B&M clone, Front & Rear ES MM, Zxtuner headlights.

  5. #5

    Join Date
    Jul 2008
    Location
    las vegas, so cal
    Posts
    21,252
    Points
    396,244
    Bank
    68,123,435
    Total Points
    68,519,679
    Donate  
    for the superman of the zx2 savers - daggit2005 Henry Ford < Dareall - SR2000 For the entertaining builds...constantly :-) - CJW For being a great member and friend to many. - CJW you sir are awarded the medal of awsome - daggit2005 
    Scammer Slaughering Medal of Honor - Hardline this is for the candy ive got from you with my purchases the past few years. - blue99fordzx2 For moving/locking my post when asked :) - blue99fordzx2 Thx for helping me get my car put back together. - X-Lr8 It's lunch time here. lolz - rascal 
    For dealing with dumbass n00bs. - RASCAL How much for the trim piece? LOL - RASCAL Absolute hero. I cannot imagine how helpful and kind a person Dareall is.  THANK YOU. - SoCalZx2Rob For doing my part out and finally getting the parts sold.  I owe it all to you.  Thanks Dareall.  I'll never forget it.  Thank god it's finally done.  XD - SoCalZx2Rob 

    Default

    there is a little threaded hole on the rotor intended for this purpose. spray a shitload of pb blaster or some other similar fluid into that hole then wait a little bit, then spray some more. then screw in a screw into that hole and hope/pray it comes apart. I have had to do this on a couple cars and this worked
    We're gonna ride the race cars
    We're gonna dance on fire

    Best sale thread ever !!

  6. #6

    Join Date
    Jun 2008
    Location
    Lurking in the shadows.
    Posts
    6,381
    Points
    96,338
    Bank
    47,766,994
    Total Points
    47,863,332
    Donate  
    enjoy brother! - daggit2005 the guy jumping in front of the bus video FTW - dareall Kamikaze! - DOUGIESTYLE 

    Default

    I had a similar issue with my 02' when I changed the rotors on her a couple of years ago. The car still had the OEM's and they would not come off. I just soaked them with PB Blaster and let it soak for a few minutes. I came back tried to get them off with a hammer (tapping around the hub area to help let the oil penetrate more). If it didn't work that time, rinse and repeat. They eventually came off after the third try.


    NEW: 2016 Focus ST:
    • Levels Performance Intercooler

    • Borla Cat back exhaust

    • Green Filter Performance Air Filter

    • Boomba Symposer Delete, Dipstick Handle, and Oil Cap

    • Visual Garage Shark Fin Antenna

    • Rally Armor Black w/ red lettering mudflaps

    • Big Mike's Performance Parts Sto n Sho license plate holder


    OLD:2002 Black ZX2

  7. #7

    Join Date
    Sep 2017
    Posts
    2
    Points
    113
    Bank
    0
    Total Points
    113
    Donate  

    Default

    PB Blaster and patients with light love taps in between and it will come off.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •